Lake Michigan Storm and Groundwater Seepage in Lake Forest
Bluff and ravine ground sends surface and ground water at foundations from the uphill side.
Phones answered 24/7 across Lake Forest. Call for a clear price before any work starts.
Fastest: call (833) 490-5225. Or send this and we call you back.
Waukegan Water Damage Restoration works in Lake Forest, the Lake County city built along the Lake Michigan bluffs and their ravines. Someone answers the phone at every hour, and a crew leaves as soon as one is free. Water is removed, then plaster, hardwood and masonry are dried slowly and checked by meter rather than by eye.
Lake Forest is laid out on the Lake Michigan bluffs, cut by ravines that run down to the shore, and Forest Park — platted by O. C. Simonds in 1896 — reaches the water at the end of that relief. Ground with that much fall in it does not behave like flat ground. Surface water concentrates where the slope sends it, which is rarely where a downspout was aimed, and two houses on the same street can sit in quite different relationships to where the water goes.
The buildings are the other half of the picture. The Lake Forest Historic District, listed in 1978, takes in Lake Forest College and Market Square, completed around 1916, along with houses by Howard Van Doren Shaw, David Adler and others. The Chicago and North Western railroad reached the city in 1859 and turned it into a commuter suburb. Substantial old construction is often more forgiving of water than new work, and far less forgiving of a crew in a hurry.
Local weather drives activity here: heat, humidity and rain change what shows up week to week.
A ravine is a drainage path that was there long before the street was. Rain that falls on the ground above it moves toward it, and a building standing between the two is in the way of that movement. The practical consequence shows up at the uphill wall: water arrives at the foundation on one side of the house and not the other, and the wet patch indoors is on the side nearest the rising ground rather than the side nearest the lake.
So the first thing a technician establishes is where the ground falls away and where it rises. That decides which wall base is read first, whether the entry is above grade or below it, and whether what looks like a plumbing problem is really surface water finding a path. A floor that stays damp in one corner through dry weather is usually ground water rather than rain, and that is dealt with as crawl space and basement moisture.
Plaster on wood lath, solid hardwood, and masonry all hold water and all give it up slowly. The temptation with old material is to drive it hard with heat and air, and that is how a plaster ceiling cracks and a board floor cups permanently. Done properly it is the opposite: lower, steadier drying over a longer period, with readings taken in the same spots so the curve can be seen. Original material that is dried in place stays original, and that is normally the better outcome for a house of this kind.
Cutting out is the last option rather than the first. Where a cavity has to be opened, it is opened at the smallest point that lets air reach the wet material, and the decision is made from a reading rather than from appearance. Drying flood-wet walls and floors explains what that process involves and why it is measured rather than estimated.
The district has been listed since 1978, and work on buildings inside it can be subject to local review in a way that work elsewhere is not. This page will not tell you what applies to your address, because that is set municipally and is not something to take from a website: the building department that covers the property is the office to ask, and it is worth asking before anything is removed. Illinois issues no statewide license for this trade, so local requirements are the ones that matter.
There is a practical reason the two things line up. A review process generally wants original fabric kept, and drying in place keeps it. A scope that proposes stripping a room back to studs because that is quicker is a scope to question in a district house. Illinois home repair law requires a written contract signed by both parties before residential work begins, and that contract is the right place to set out what will be dried rather than replaced.
It is not, and the distinction is useful. The river's gages and warnings sit inland — the National Weather Service puts flood stage from Libertyville down to Prospect Heights at 12.5 feet — and the lakefront cities are outside that drainage. Lake Forest gets the same storms that drive those crests, without the river. When a county-wide flood is in the news, a caller from here is usually dealing with something else entirely.
What that leaves is rain volume, ground water, pumps and plumbing. A storm sitting over the bluff for an hour will overwhelm the drainage around a building regardless of elevation; a failed pump will flood a basement on the driest week of the year. Both are ordinary, and both are handled the same way: stop the water, remove it, then dry and measure. Flood water extraction and pumping is where that begins.
Bluff and ravine ground sends surface and ground water at foundations from the uphill side.
A floor that stays damp through dry weather on sloping ground is usually ground water rather than rain.
Old plaster, lath and solid timber are dried low and slow, with readings taken in fixed positions.
In a large old house a leak can run inside a wall for weeks before it shows on a surface.
The square and the college quarter hold retail and institutional buildings that need drying on a working schedule.
Cool, enclosed cavities in older construction stay damp long enough for mold if drying is not finished properly.
A crew is dispatched as fast as one is available, and you approve the estimate before any work starts.
Lake Forest ZIP codes we cover: 60045. Type yours to confirm, or just call.
Yes, the whole 60045 area. The line is answered at any hour on (833) 490-5225 and a crew is dispatched as soon as one is free, with no arrival time promised. Calls from the bluff cities and the inland river towns are worked from the same county-wide coverage.
Often not. Plaster on lath can frequently be dried in place where modern drywall could not, and whether it can depends on how long it was wet and how high the water went. The decision comes from meter readings at the wall base, not from how the surface looks.
Possibly, and it is set locally rather than by the state. Ask the building department that covers your address before any removal work starts. Illinois does not license this trade statewide, which makes the local office the authority worth calling.
Yes. Retail units, offices and institutional buildings are dried on a plan that isolates the wet area so the rest can stay in use where possible. Air volume is larger than in a house, so more equipment runs for longer, and readings still decide when it comes out.
Usually a supply line, a waste pipe or an appliance on the floor above, and the stain is often some way from the entry point because water travels along a joist before it drops. Finding it is a meter and inspection job before anything is opened up.