Phones answered 24/7Waukegan, IL
Call (833) 490-5225
Urgent? Phones answered 24/7

Des Plaines River flood damage in Waukegan and Lake County

River floodwater is pumped out, contaminated porous materials are removed, and the structure is dried and documented.

  • Answered 24/7
  • Des Plaines River floods
  • Lake County basements

Get a fast quote

Fastest: call (833) 490-5225. Or send this and we call you back.

River Flood Damage

Des Plaines River Flood Damage: what it covers

Quick answer

Water that has come out of the Des Plaines is treated as contaminated, so the work is removal first and drying second. Phones at Waukegan Water Damage Restoration are answered around the clock for Lake County, and a crew goes out as fast as one comes free. Porous materials the river reached are taken out, not dried.

Des Plaines River Flood Damage illustration for Waukegan, IL, with a lighthouse in the background

The Des Plaines runs north to south through Lake County on the western side of Waukegan, and it has the longest measured flood record of anything in this county. In April 2013 it reached a record crest of 16.53 feet near Lincolnshire, and the state issued a disaster proclamation covering Lake, Kane and McHenry counties. The National Weather Service puts flood stage from Libertyville down to Prospect Heights at 12.5 feet.

July 2017 showed what a crest does to houses rather than to a gauge. The village of Gurnee recorded 12.09 feet on July 16 at the Route 120 gauge, its highest since 1976, and by July 14 more than 2,000 structures across Lake County were under water. At Russell, upstream to the north, the Weather Service logged 12.15 feet against a previous record of 11.09 feet set in 2004.

This page is about what happens inside the building afterwards. River water has been over roads and yards and past whatever the current lifted, so decisions about what stays and what goes turn on contamination as much as on how wet something is. Call (833) 490-5225 and the first part of the conversation is about power, depth and whether the level is still climbing.

Service area
Waukegan & Lake County
Availability
Phones answered 24/7, emergencies first
Warning signs

Signs you need des plaines river flood damage

Treat any flooded lower level as live until the power to it is off, and do not wade in to reach a panel that is already in the water. Keep children and pets out of the space entirely, because river water carries sewage and chemical contamination that a rinse will not deal with. Do not run a furnace, boiler or air handler that floodwater reached, and do not use a household vacuum on standing water. If gas equipment has been submerged, leave it alone until it has been checked.

  • Water standing on a basement slab or a ground floor after the river has risen
  • A silt line left on the wall, the furnace cabinet or the stored boxes once the level drops
  • Mud and fine grit worked into carpet, floor joints and the bottom of door casings
  • Doors and casings in the lower level that swell and bind days after the water has gone
  • A floor drain or sump pit that stays full and will not fall away
  • An earthy or sour smell in the lower level that strengthens when the house is closed up
  • Vinyl, laminate or engineered boards cupping, lifting at the seams or sounding hollow
Our process

How our des plaines river flood damage visit works

  1. Decide when it is safe to start

    A technician checks whether the circuits feeding the wet area are off, how deep the water is, and whether the river is still coming up. Starting on a rising level means doing the same job twice, so on a river flood the timing is part of the work.

  2. Bring the level down in stages

    Pumps take the bulk of the volume, discharged well away from the foundation so it does not run back in. The drawdown is deliberately staged while the ground outside is still waterlogged, and the walls and floor joints are watched as the level falls.

  3. Extract and clear what the pumps leave

    Extraction units then pull water out of the slab surface and anything still holding it, with repeated passes over the same ground. Silt is cleaned off hard surfaces while it is still wet, because dried river mud is a much harder job.

  4. Remove the porous materials the river touched

    Carpet and pad, batt insulation, particle board, the lower band of drywall and anything upholstered that sat in floodwater comes out for proper disposal. Cut lines are marked, explained and photographed before a blade goes near a wall.

  5. Clean, dry and leave a record

    What stays, concrete, block, tile, solid framing and metal, is cleaned and treated, and only then does drying equipment go in. Readings in the slab, the bottom plates and the subfloor are taken on each visit until they reach dry targets.

Job stories

Typical jobs for des plaines river flood damage

Typical job
Illustration: Typical: Des Plaines water across a ground floor in Gurnee

Typical: Des Plaines water across a ground floor in Gurnee

What homeowners notice
The river has been above flood stage for a day and brown water has come up through a lower level, leaving silt along the baseboards and a line on the drywall a foot above the floor.
What we do
The crew confirms the power to the level is off, pumps from the lowest point, lifts the saturated pad and carpet, meters the lower wall and opens it where moisture is trapped. Hard surfaces are cleaned because the water came from outside, then air movers and dehumidifiers run to target.
What to expect
The homeowner is left with dated photographs, the readings and a removal list, and the repair work is quoted separately once the framing reads dry.

an extraction visit, then drying visits over several days typical visit

Is river floodwater treated differently from a burst pipe?

Yes. Clean water from a supply line can often be dried in place, while river water is handled as contaminated, so porous materials that soaked in it are removed rather than dried. That one difference changes the scope of the job more than depth does.

Water is graded by what is in it, not by how much of it there is. A supply line letting go upstairs puts treated water into a building, and carpet, pad and drywall that got wet can often be dried and kept. Floodwater that ran across roads and lawns carries soil, oil, fertiliser and animal waste, and nobody can judge it by looking.

So on a river loss anything porous and absorbent that sat in the water comes out: pad, fibrous insulation, chipboard, cabinet bases, cardboard. Solid material is cleaned, treated and dried. It feels like an aggressive scope when the water looked clear, and it is the reason houses dried properly after a flood do not smell six months later.

How long does a river flood take to dry out?

Longer than the same volume of clean water, because removal and cleaning come before drying starts, and because the building sits in saturated ground. Readings decide the end date rather than a diary, and the soil outside has to drain before the inside settles.

A drying plan on a river loss runs behind the cleanup rather than alongside it. The water has to be out, the silt off, the porous materials gone and the surfaces treated before equipment is worth running, because drying a dirty structure bakes the contamination into it.

The second factor is the ground. After a crest the soil around the foundation stays loaded for a long time, and the slab and the lower courses of block keep drawing from it. A technician reads the slab and the bottom plate, not the air, and where the numbers plateau above target the honest answer is that the structure is still being fed from outside.

What makes one river flood job bigger than another here?

Depth and how long the water sat, the floor area it reached, how contaminated it was, the age and construction of the building, access for equipment, and whether one unit or several are involved. No figure is published here; the scope and the price are explained and approved before work starts.

Depth and dwell time do most of it. Two inches for an hour and eight inches for two days are different jobs on the same floor plan, because the second has water inside wall cavities, under fitted flooring and in insulation. Floor area comes next, then how many rooms and levels were reached, since each needs its own equipment and its own readings.

Construction and access change the rest. A finished basement with built-in cabinets, carpet and stud walls has far more to remove than an open utility basement, and a walk-out door beats a narrow interior stair and a long hose run. Illinois requires a written contract signed by both parties for home repair and remodeling work above the threshold set in state law, so the agreed scope is on paper before a crew starts.

Does this get handled as a flood claim or a water claim?

Water that rises off a river and enters a building is generally handled as flood, which standard home policies generally exclude and separate flood cover generally handles. Backups and burst pipes are generally treated as different perils. Your policy and your insurer decide, so document everything.

What a crew can do is mitigate and document: stop the loss getting worse, keep dated photographs, log moisture readings and list what was removed. If a claim goes wrong, the Illinois Attorney General's consumer fraud hotline can tell you whether complaints have been filed against a contractor. The water damage insurance claims guide covers documentation in more detail.

What should I do in the hours before a crest arrives?

Move contents upstairs, get vehicles and valuables out of the lower level, and photograph the space while it is dry. Turn off power to the basement at the panel if you can do that from a dry position. Then leave the water alone and call.

Sandbagging is a real defense and the county has done it at scale, handing out roughly 170,000 sandbags during the April 2013 flood. Bags work best as a low wall across an opening rather than a ring around a house, and they are not worth standing in rising water for. Roads go under before houses do, and in 2013 Grand Avenue in Gurnee closed between Routes 21 and 41, so decide early whether you are staying or leaving.

Options

Types and options for des plaines river flood damage

River water over the threshold

The river leaves its channel, spreads across low ground and comes in at grade through a door, a garage or a basement window. Depth builds over hours and leaves silt on every surface. Removal is wide here and extraction is the smaller half of the job.

Groundwater pushed up ahead of the crest

A river in flood raises the water table beside it, and water arrives at the slab joint or a pipe penetration before any surface water reaches the building. There is no silt line, so people assume a plumbing fault. The sump runs constantly and the floor keeps getting wet after being mopped.

Backflow during the same storm

When the drainage system cannot take any more, the lowest fixture in the lowest building becomes the easiest route out. That water is handled on its own terms, covered on the sewer backup cleanup page, and where both happen at once the sewage side sets the standard for what is thrown away.

Lake County

Why des plaines river flood damage is different in North Shore

The Des Plaines reaches this service area from the west rather than running through Waukegan itself, so most river calls come from Gurnee, Libertyville, Wadsworth, Russell and Lincolnshire while the lakefront towns stay dry in the same storm. During the July 2017 flood, Gurnee's flood page carried a request for immediate sandbagging help in Wadsworth on July 14, which is a fair picture of how the north end of the corridor loads up.

The river is fed from well outside the county. Gurnee's flood guidance explains that Des Plaines flooding follows rain or snowmelt across a wide watershed, including ground up in Wisconsin, while local tributary and drainage flooding follows heavy rain close to home. For a building owner that is the difference between a day or two of warning and none at all.

Housing in this part of Lake County is a mix of pre-war and postwar construction, and the difference shows once a crew opens up. Older houses tend toward plaster on lath, deeper trim and timber subfloors that have usually been wet before; later subdivisions bring drywall, chipboard subfloors and framed partitions below grade. The second type looks easier and is often the bigger removal.

Need des plaines river flood damage today?

Call any hour and explain what is going on. You get a clear price before any work starts.

Related

Flood Water Extraction and Pumping

Standing water is pumped and extracted in stages, screened for debris, and discharged where it will not run straight back in.

Sewer Backup Cleanup

Contaminated water and solids are removed, porous materials are disposed of, surfaces are cleaned and treated, then the room is dried.

Heavy Rain Basement Flooding

Rainwater that got into a basement is extracted, wet finishes are removed, and the slab and framing are dried to readings.

Guides

Read before you book

FAQ

Des Plaines River Flood Damage FAQs

How high does the Des Plaines have to get before houses take water?

There is no single number for a building, because what matters is your ground level rather than the gauge. The Weather Service sets flood stage from Libertyville to Prospect Heights at 12.5 feet, and crests above that have put water into Lake County buildings. Gurnee reached 12.09 feet in July 2017 and 10.46 feet in September 2019, which the village ranks as its sixth largest crest.

Can I just dry the basement myself with fans and a dehumidifier?

Not after river water. Household equipment can lower the humidity in a room while the slab, the bottom plates and the inside of a wall cavity stay wet, and contamination stays where it landed. The materials that need to come out will not come out by drying. Fans are worth running while you wait for a crew, with the windows open and the power to that level off.

The water has already gone. Is it too late to call?

No, and this is a common call a few days after a crest. Water drains away faster than a structure dries, so framing, subfloor and the lower drywall can still be holding a great deal. A technician takes readings first and says plainly whether there is anything left to do. Where mold has already started, that becomes a separate scope.

Do you cover the whole river corridor or just Waukegan?

The service area runs across Lake County from the lakefront out to the river towns and the Chain O'Lakes side. Gurnee and Libertyville sit directly on the Des Plaines and see the most river work, with Wadsworth, Russell and Lincolnshire on the same corridor. Phones are answered 24 hours a day and a crew is sent as soon as one is free.

What happens to a finished basement after a river flood?

Expect the finishes to come out and the structure to stay. Carpet and pad, laminate, framed partitions below the water line, insulation and cabinet bases are removed as contaminated, while slab, block, studs and joists are cleaned, treated and dried in place. Rebuilding is quoted separately once readings confirm the structure is dry.

Is mold certain after a flood like this?

It is not certain, but it becomes likely wherever material stays wet beyond a couple of days, which is why removal and drying move quickly. The drying log is the best protection you have. Where growth is already visible when a crew arrives, it is assessed as its own scope, covered on the mold after water damage page.

WhatsApp