Phones answered 24/7Waukegan, IL
Call (833) 490-5225
Guide

Des Plaines River flood: the first decisions in a Lake County house

The first steps after Des Plaines River water reaches a Lake County home: power, safety, photographs, pumping and the drying window, written for Waukegan homeowners.

Illustration for the guide "Des Plaines River flood: the first decisions in a Lake County house" (Waukegan, IL)
Short answer

Keep out of standing water until the power to the wet area is off, then photograph everything before anything moves. Treat river water as contaminated, get the standing water out, and open the wet band of wall so the framing behind it can dry. The order matters more than the speed.

Key takeaways

  • Electricity, not the water itself, is the first hazard in a flooded Lake County basement.
  • River water is handled as contaminated, so soaked insulation, pad and the lower drywall usually come out rather than dry in place.
  • National Weather Service flood stage on the Des Plaines from Libertyville to Prospect Heights is 12.5 feet, and the river has run well past it.
  • The gage forecast normally gives a Lake County household some notice, which is the window for moving contents up and out.
  • Photographs taken before any cleanup become the record of what was wet and how high the water stood.
  • Drying only starts once the water is out and the wet materials are opened, and it is confirmed by meter readings, not by appearance.

What is the very first thing to do when river water is in the house?

Stay out of it until the circuits feeding the wet area are off, and switch them off from a dry position. If the panel is in the flooded space, leave it and have the utility or an electrician handle it. Nothing in the basement is worth entering live water for.

Floodwater reaches outlets, cords, furnace controls and whatever was plugged in at floor level. From the top of the stairs you cannot tell whether a circuit is live, and a basement light that is off tells you nothing about the receptacle under the water. So the sequence is power first, then gas appliances if the water has reached burners or controls, then everything else. A technician arriving at a flooded property runs the same checks before stepping down.

Once the area is safe to enter, the next decision is about people rather than property. Floodwater is not clean, children and pets stay out, and anyone going in wears boots and gloves and washes afterward. The house will still be wet in an hour. The things that genuinely cannot wait are the power, the gas and getting the standing water moving once there is somewhere for it to go.

Why is river water treated differently from a burst pipe?

Because of where it has been. Water that crossed yards, roads and ditches before it entered carries soil, fuel residue, lawn chemicals and whatever the storm sewers surcharged. It is handled as contaminated, which changes what can be saved.

The practical result is that porous material which soaked in floodwater is taken out rather than dried. Carpet pad, fiberglass batt insulation, particleboard and the bottom band of drywall all hold both moisture and what came with it, and no amount of air movement makes them clean again. Hard surfaces are a different matter: concrete, tile, framing lumber and solid wood are cleaned, disinfected and then dried in place, which is why a flooded basement is usually stripped before it is dried.

The depth of the stripping follows the water line plus the distance moisture wicked above it, which a meter finds. A crew working flood water extraction and pumping will mark that line on the wall before anything is cut. If sewers backed up at the same time, the handling is stricter still, and sewer backup versus flood water sets out why the two are not the same job.

How much warning does the Des Plaines usually give?

River flooding here is rarely instant. The National Weather Service puts flood stage from Libertyville to Prospect Heights at 12.5 feet and issues warnings for the reaches near Gurnee and Russell, so a forecast crest generally gives a household some hours to act.

The record on this river is the reason to use that window. In April 2013 the Des Plaines crested at 16.53 feet near Lincolnshire, a record, and Lake County handed out roughly 170,000 sandbags; Grand Avenue in Gurnee closed between Routes 21 and 41. In July 2017 the river hit 12.09 feet at Gurnee on the sixteenth, its highest there since 1976, with about 100 homes and 16 businesses flooded in the village before the crest even arrived, and 12.15 feet at Russell on the fourteenth against a previous record of 11.09 feet from 2004. September 2019 produced a 10.46 foot crest at Gurnee, which the village ranks as its sixth largest.

The village of Gurnee explains the pattern plainly: the Des Plaines rises on snowmelt or rainfall across a wide watershed, part of it over the Wisconsin line, while tributary and drainage flooding follows local heavy rain. That distinction tells you which forecast to watch. A river crest is a gage number you can follow for a day or more; a tributary or street-drainage flood arrives with the storm.

Des Plaines readings that have put water in Lake County buildings
When and whereGage readingWhat it is remembered for
Libertyville to Prospect Heights12.5 feetNational Weather Service flood stage for this reach
Near Lincolnshire, April 201316.53 feetRecord crest; state disaster proclamation for Lake, Kane and McHenry counties
Gurnee, July 16, 201712.09 feetHighest at the Route 120 gage since 1976
Russell, July 14, 201712.15 feetPast the 11.09 foot record set in 2004
Gurnee, September 201910.46 feetThe village's sixth largest crest

What should you photograph, and when?

Before anything is moved, mopped or thrown out. Photograph each wet room wide, then close on the water line, the baseboards, the furnace and water heater, and any contents sitting in the water. A short video walking the rooms is worth as much as the stills.

The water line is the one detail people forget and later need, because once the walls are stripped there is no way to show how high it stood. Capture it against something of known height, a stair riser or a door casing, and get the same shot in every affected room. Photograph serial plates on mechanical equipment while they are still readable, and keep anything you remove in a pile outside until it has been recorded rather than hauled away the same afternoon.

Those images do two jobs. They tell whoever scopes the work what the building looked like before anyone touched it, and they become the file behind a claim. The insurance claim documentation page covers what else belongs in that record. Nothing here is advice about your policy.

How does pumping fit into the first hours?

Standing water comes out once the river outside has dropped far enough that it is not simply coming back, and once the power question is settled. Pumping a basement dry while the ground around it is still saturated can be hard on the walls and the slab.

Groundwater pressing on a foundation is part of what is holding it in balance when the outside is flooded. Taking the inside water away all at once removes the counterweight, which is why crews draw a deep basement down in stages and watch the walls and floor while they do it. Where the water is shallow and the river has already fallen, that caution matters less. Either way the decision is made at the building, looking at the depth and what the river is doing.

After the bulk water is gone, the remaining work is mud, silt and the water inside materials. Silt is shoveled and flushed rather than vacuumed, drains and sumps are checked for the debris the flood pushed into them, and only then does drying equipment make sense. A sump pump that failed during the flood is a separate repair, and it is worth confirming whether it quit, lost power or was simply overrun.

What can usually be saved after a river flood, and what cannot?

Hard, non-porous things usually survive cleaning: concrete, tile, framing, solid wood, metal. Soft and compressed materials that drank the water generally do not: carpet pad, batt insulation, particleboard furniture, mattresses and upholstered pieces.

Solid wood flooring sits between the two. It sometimes comes back if it is lifted early, dried slowly and refinished, and sometimes cups and buckles beyond saving; the honest answer on day one is that nobody knows yet. Engineered and laminate floors fare worse, because the layers come apart at the glue line. Appliances and the furnace are judged on whether water reached the motor, the controls or the burner compartment, and an electrician or a service technician makes that call rather than a restoration crew.

Paper, photographs and documents can often be stabilized if they are frozen or air-dried quickly, which is a decision worth making in the first day rather than the first week. For everything else the rule is simple: it was in floodwater, it is porous, it is heading for the curb. Making that call quickly leaves more room, air and time for the materials that can actually be dried.

What happens once the water is out?

The structure is cleaned and disinfected, the wet band of wall is opened, and air movers and dehumidifiers run against daily meter readings until the framing and slab are back to normal moisture levels. Appearance is not the test.

A basement wall can feel dry on the surface while the stud behind it is still wet, and insulation inside a cavity dries far more slowly than the drywall over it. That is why the band is cut out, why cavities are opened to airflow, and why a crew keeps reading the same points every day rather than finishing when the floor looks clean. Structural drying and dehumidification describes the equipment and the readings in more detail.

Rushing this stage is what produces the second problem. Mold needs damp organic material and little else, and a wall closed up while the stud is wet gives it exactly that. Rebuild should begin against a structure confirmed dry, with the readings to show it.

What is worth doing before the next high water?

Move what matters out of the lowest level, know where your shutoffs and panel are, and treat the river gage forecast as the trigger rather than the sight of water in the street. The watershed drains a long way upstream of Waukegan.

Households that came through 2013 and 2017 with less loss tended to have done the dull work early: nothing irreplaceable stored on a basement floor, mechanical equipment raised where that was possible, a working sump with a tested backup, and a sandbag plan made before the sandbags were needed. Lake County distributed sandbags in volume in 2013, and villages on the river publish their own flood information when a crest is forecast.

What not to do is wait for certainty. A forecast crest can be revised upward, and the hours before the water arrives are the only ones in which moving contents is easy. If the house does take water, call once the power is dealt with and the river has stopped rising; (833) 490-5225 is answered at any hour, and heavy rain basement flooding covers the storm-drainage version of the same problem.

Frequently asked questions

Is it safe to go into a flooded basement?

Not until the power to that level is off, and not while water is still rising. Submerged outlets, cords and appliance controls can energize the water, and you cannot tell from the stairs whether a circuit is live. If the electrical panel itself is in the flooded area, leave it to the utility or an electrician. After power is dealt with, wear boots and gloves, keep children and pets out, and wash thoroughly afterward.

Does a standard home policy cover river water?

Flood coverage and ordinary water damage coverage are usually separate things, and only your own policy documents and your insurer can tell you what applies to your house. This guide deliberately gives no deadlines, limits or figures. The Illinois Department of Insurance is the state office that licenses public adjusters if somebody offers to manage a claim for you. Document everything before cleanup either way, because that record is useful whatever the answer turns out to be.

Can drywall be saved after the Des Plaines floods a basement?

The soaked band generally cannot. Floodwater is treated as contaminated, and drywall and the insulation behind it hold both the water and what was in it. The usual approach is to cut out the wet band above the water line, remove the insulation, clean and disinfect the framing, and dry the cavity with air movers and dehumidifiers. Drywall well above the line that only took humidity often stays.

How long before mold becomes the issue?

Sooner than most people expect, because damp organic material is all it needs. That is the reason crews open wet cavities rather than leaving them closed to dry on their own, and the reason the drying stage is measured with meters instead of judged by feel. A wall closed up while the stud behind it is still wet is the common path to a second round of work. Early extraction and opening up is the practical defense.

Should I pump the basement out as fast as I can?

Not necessarily. While the ground outside is saturated, the water inside is partly balancing the pressure on the walls and slab, so a deep basement is normally drawn down in stages with the walls watched as it goes. If the river has already fallen and the water is shallow, that caution matters less. Either way the judgment is made at the building rather than from a rule of thumb.

Will a crew come out overnight?

Phones for this trade are answered 24 hours a day, and a crew is dispatched as soon as one is available. Nobody can promise an arrival time, particularly during a county-wide flood when many houses are calling at once, and this guide will not pretend otherwise. What you can do in the meantime is deal with the power, keep people out of the water, and photograph the rooms before anything moves.

Sources

  1. National Weather Service
  2. Village of Gurnee
  3. Lake County, Illinois

This guide is general information for Lake County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.

Still stuck? We pick up 24/7.

If it's an emergency, call now. For non-urgent help, send the form and we'll call you back.

Keep reading

More guides

Why Lake County basements flood in a downpour, and what to do

Heavy rain gets into a basement three ways: over the surface and down the foundation wall, upward through the slab and joints as groundwater pressure rises, and backward through a floor drain when the sewer or storm system surcharges.

WhatsApp